Antifreeze concentrate developed for building engineering systems with
inhibitors and a biocidal effect additive.

Properties: Eco-friendly, Antifreeze, Borax free, Protector,
Inhibitor

In a ready-to-use version for -15°C (TP-500 -15) or other temperatures!

Packaging: 10 liters; 25 liters

Triprotect-propylene-500 characteristics

- Propylene-glycol-based additive, so it can be used in building
engineering systems containing domestic hot water heat exchangers!

- Recommended for use as a low freezing point heat transfer material in
heating systems, heat pump primary circuits, cooling and dehumidification
systems

- Due to the unique corrosion protection additive, the product can also be
used for tanks with hot-dip galvanised internal surface protection.

- Anti-corrosion, antibacterial and antifreeze effect

- „BORAX FREE” liquid

- The expected lifetime of the liquid is 10 years

- Excellent corrosion protection and antibacterial effect up to 1:4
dilution

- Monopropylene glycol (MPG)-based liquid with corrosion inhibitor and
biocidal effect additive

- Due to its antibacterial additive content, the formation of algae can be
avoided

- Suitable for commonly used metals, including aluminum parts, does not
damage rubber and plastic surfaces, seals

- The presence of the inhibitor can be checked using the Mo100 Kit test kit

- From German raw material

Dosage and application

The expected lifetime of the fluid in professionally operated systems is 10
years. We recommend that you check the appropriate frost protection (freeze
resistance temperature with a refractometer) and pH every two years.

The use of the product in closed heating and cooling systems guarantees
efficiency, in the case of open heating systems, consult with the manufacturer,
due to a possible increase in the inhibitor active ingredient content, which
can be achieved by dosing with our P100 Premium Inhibitor!

Before use, the concentrate of the heat transfer medium is diluted with
water to the temperature that ensures the desired frost protection. The
concentrate is made for dilution with treated water, can be diluted with
treated water to a ratio of 1:4 (but can be increased to a ratio of 1:1, taking
into account the specifications of the pump and device manufacturer), contains
a mixture of inhibitors and antibacterial (biocidal effect) substances. Mixing
must be done before filling the liquid into the system, at least 30 minutes
before filling: after diluting with treated water, the water with
antifreeze concentrate must be continuously stirred in a suitable container or
barrel to ensure proper mixing. The antifreeze temperature is checked with a
refractometer! Borax-free material. The presence of the inhibitor can be easily
checked with the Mo-100 Kit (molybdenum tester). When mixed with properly
treated water, it exerts its maximum corrosion protection, guaranteed effect!

Do not mix our antifreezes with each other!

To avoid electrochemical corrosion, please do not forget to ground the
pipework and appliances (EPH) and to separate dissimilar materials with a
dielectric intermediate screw.

Mix ratio

Maximum dilution 1:4

- In the case of a 10-liter package, when added to a maximum of 40 liters
of treated water produced with a DEMIN-1500 demineralization unit, a maximum of
50 liters of liquid can be obtained.

- In the case of a 25-liter package, when added to a maximum of 100 liters
of treated water produced with a DEMIN-1500 demineralization unit, a maximum of
125 liters of liquid can be obtained.

Dilution

TP500 : treated water 1:1 / 1:1,5 / 1:2 / 1:3 / 1:4

Frost-free temp. -32°C / -20°C / -15°C / -10°C / -7°C

TP500, because it is based on propylene glycol and can
be diluted up to 5 times as much with treated water for a heating medium with
adequate corrosion protection and antibacterial properties.

Safety precautions

The mixture is not classified as hazardous. The mixture contains
propane-1,2-diol.

First aid

In case of inhalation: there is no risk of inhalation under normal
conditions of use. In case of skin contact: no dangerous effect on the skin.
Wash the affected area thoroughly with soap and water. In case of contact with
eyes: rinse eyes thoroughly with min. 15 minutes with plenty of water. Remove
the contact lenses. After swallowing: rinse the mouth immediately. Do not
induce vomiting - the risk of lung damage is greater than the risk of
poisoning. Call a doctor immediately.

Storage

Keep tightly closed in its original packaging.

Store between +10°C and +25°C in a dry and well-ventilated place.

If stored properly, the product can be stored for 24 months.