Cleaning concentrate for heating and cooling systems to remove corrosion, scale
deposits and sludge.

Property: Cleaner

Packaging: 0,5 liters; 5 liters

Premium800 bull cleaner characteristics

- Designed for short-term intensive removal of corrosion and limescale

- It increases the efficiency, heat transfer and functionality of the system

- The mixture is pH neutral

- Rapid onset of efficacy

- The cleaning concentrate is neutral

- Safe for glass and plastics

- Suitable for commonly used metals, including aluminum parts, does not
damage rubber and plastic surfaces, seals

- Extends the efficiency and durability of the systems

- Designed for both home and industrial applications

Chemical and physical properties

Appearance: light yellow suspension with white sediment

Odour: typical

pH: 6

Specific gravity: 1,1 g/cm3 (20°C)

Solubility: fully miscible with water

Compatible with EN 14868

Dosage and application

The container / bottle containing the product must be shaken thoroughly
before use. May contain deposits. If the sediment cannot be shaken, it can be
dissolved with warm water. We recommend that you install a SAFETY100 magnetic
mechanical filter before starting cleaning. In the absence of a filter, there
is a risk of damage to the circulation pump or the heat exchanger. Fill the
system with soft or medium hard water (≤ 10°dH) and add P800 cleaning agent
diluted in the appropriate proportion with water.

In the case of a new system, circulate it in a 1% dilution for 1-2 hours,
in the case of an existing system, in a 2-10% dilution, for 2-5 days, depending
on the degree of corrosion. The pH value rises during cleaning. When the pH
reaches 8.5-8.7, the detergent loses its effectiveness. If the system is very
dirty, repeat the whole process. After cleaning, drain the system and rinse
thoroughly twice (according to EN 14868 standard). Then fill the system (with
DEMIN-1500 demineralization unit) with treated water and add P100 inhibitor and
P700 anti-biofilm additives.

Mix ratio

Dilution between 1:10 and 1:100

Safety precautions

The product is not classified as dangerous.

First aid

In case of contact with eyes: rinse with water for 15 minutes. Ingestion:
rinse the mouth immediately, give the victim 0,5 l of drinking water, but do
not induce vomiting (risk of lung damage). In case of skin contact: remove
contaminated clothing and wash skin with soap and water. In case of inhalation:
breathe fresh air, ventilate the room properly!

Storage

Keep tightly closed in its original packaging.

Store between +10°C and +35°C in a dry and well-ventilated place.

If stored properly, the product can be stored for 24 months.