Inhibitor additive for the aqueous medium of heating, cooling and
dehumidification systems.

Properties: Inhibitor, With molybdenum content

Packaging: 0,5 liters; 5 liters

Premium100 inhibitor characteristics

- Suitable for any type of closed heating and cooling system

- Anti-corrosion product with a film-forming effect, designed to protect
the system against corrosion and scale deposits

- It increases the efficiency, heat transfer and functionality of the
system

- Suitable for commonly used metals, including aluminum parts, does not
damage rubber and plastic surfaces, seals

- Designed for both home and industrial applications

- Estimated time for replenishment 4-6 years, depending on the results of
the inspection

- The concentration can be checked with test Mo100 Kit

- Suitable for glycol liquids

- Remains in the system, not drained

Chemical and physical properties

Appearance: clear colorless or yellow liquid

Odour: typical

pH: 8

Specific gravity: 1,13 g/cm3 (20°C)

Solubility: fully miscible with water

Compatible with EN 14868

Dosage and application

The dosage described below guarantees efficiency in closed heating and
cooling systems, in the case of open heating systems, consult the manufacturer!

Premium quality, concentrated active ingredient content: 0,5 liters of P100
inhibitor with increased active ingredient content for 150 liters of treated
(not softened with common salt) water, dilution ratio: 1:300 (but can be
increased to a ratio of 1:100), thanks to its high molybdenum content, it
provides long-term protection. We recommend combining the product with P700
anti-biofilm and P400 neutral cleaning additive (as described in the Triprotect
Kit description) or adding it to the treated water of the pre-purified system.
It can also be used for glycolic heating and cooling water! Compatible with the
EN 14868 standard, its use is effective with treated water, setting the level
of desalination is necessary in compliance with the regulations of the
manufacturers of the devices in the system.

Using it in higher concentrations does not cause system damage (max. 1:100,
5 liters + 500 liters of water)! Measure the concentration of the product at
least once a year using the Mo100 Kit. Leave the inhibitor in the system, do
not drain it.

Mix ratio

Maximum dilution 1:300

A maximum of 150 liters in the case of a 0,5-liter package, and a maximum
of 1500 liters in the case of a 5-liter package, for treated water produced
with a DEMIN-1500 demineralization unit.

Safety precautions

The product is not classified as dangerous.

First aid

In case of contact with eyes: rinse with water for 15 minutes. Ingestion:
rinse the mouth immediately, give the victim 0,5 l of drinking water, but do
not induce vomiting (risk of lung damage). In case of skin contact: remove
contaminated clothing and wash skin with soap and water. In case of inhalation:
breathe fresh air, ventilate the room properly!

Storage

Keep tightly closed in its original packaging.

Store between +10°C and +35°C in a dry and well-ventilated place.

If stored properly, the product can be stored for 24 months.